Bring plywood, cutting and finishing into one factory order. Get panels and parts specified for your assembly, visible surfaces and next workshop process.
Work directly with CUZI PLY, your plywood manufacturer and direct supplier in Linyi, China, with 10 production lines. We quote the panels or parts, agreed processing, finished edges and export packing for your order.
Choose the starting point below, then keep material, machining and finishing on the same part list. You can request one operation or a combination; we confirm the supplied form and included work in your factory quotation.
Specify panels, blanks or strips with finished dimensions, quantity, grain direction and the edges that need to stay visible.
To get started: Part sizes, thickness, quantities and cutting direction.Bring outlines, bores, pockets and joint details into the plywood order, with reference faces and the fit your assembly needs.
To get started: Drawing revision, profiles, hole positions and tolerances.Choose exposed plywood, decorative edging or a protective treatment with the face finish, joint and service conditions.
To get started: Visible edges, edging material, finish and final dimensions.Plan full panels, rectangular blanks or strips around final part dimensions and quantities. Mark face grain, reference edges, visible sides and any allowance for later trimming. Keep a cutting list with each part reference rather than combining different pieces under one total sheet count.
State whether the dimensions describe the blank, the machined piece or the finished edged part. Include squareness, edge appearance and the tolerances needed for paired components. Keep edging and coatings in the dimensional basis.
Keep grain or decor direction with each piece. A cutting layout includes the cut width and any trimming, while narrow strips and thin parts need support and protective separation. Compare usable parts, processing and waste together when choosing the sheet format.
Request outlines, drilled holes, pockets, grooves and cut-outs with the panel construction and finished thickness. Identify the presentation face, measurement datums, hole-entry face and the hardware or mating part. Include handed pieces and matching sets so geometry and appearance stay together.
Give profile dimensions, hole diameters and positions, pocket depths, slot widths and internal radii. Show joint clearance and the fitting that each hole or groove receives. For through-cuts, specify the appearance needed on both faces and the exposed edge.
Define important tolerances and how the part will be measured. Actual thickness, flatness, work holding, material condition and later finishing belong in the requirement. We agree the processing and dimensional checks for your geometry rather than offering one accuracy figure for every part.
CNC Plywood Components: features, fit & order details
For routing, drilling, corners, forming or laser-material questions, use Plywood Cutting & Forming. The order identifies the actual machining and supplied parts.
Decide which edges remain exposed plywood, receive decorative edging or need a specified protective treatment. Include the edging material and thickness, colour or veneer match, adhesive, corner details and surface finish. Name every edge on the drawing, including those concealed after assembly.
Choose visible edges with the face veneer, laminate or coating. Identify flush trimming, edge profiles and the finished size after edging. Keep matching parts and edge positions on the same part reference.
Describe wetting, cleaning and service conditions. Decorative banding and moisture protection are different requirements; joints, holes and site trimming also need the specified treatment. Agree which finish and edge operations are completed before shipment.
Compare Surface & Overlay Options and Moisture & Water Resistance when selecting the complete finish.
The cutting drawing and panel specification belong together. Visible furniture edges, concealed cabinet parts, decorative panels and protected packing parts can need different constructions. Start with the surfaces, joints, weight, fixings and intended environment, then choose the plywood.
Give the information you already know. A dimensioned drawing and part list help our factory quote your custom plywood components on a consistent basis. Identify any design detail you need help completing; our team will arrange the drawing information needed for the next step.
| Requirement | What to include | Why it matters |
|---|---|---|
| Part identity and quantity | Part reference, drawing revision, quantity per part, matching sets and repeat-order schedule. | Connect each component to its material, features and package label; keep handed or mirrored parts distinct. |
| Panel construction | Face and core, bond, finished thickness, surface or coating and required product documents. | Choose the plywood around machining, visible edges, hardware and the conditions in which the part will be used. |
| Finished geometry | Units, length and width, profiles, holes, pockets, radii, depths and reference faces. | Distinguish the cut blank from the finished part and identify the features that must fit together. |
| Grain and appearance | Face grain arrows, visible face, matching components, colour or decor direction and exposed edges. | Keep appearance through cutting and nesting instead of choosing a layout only for material yield. |
| Fit and measurement | Important tolerances, datums, hardware details, mating parts and the stage at which dimensions are measured. | Keep panel thickness, hole locations, joint clearances and finished-part dimensions as separate requirements. |
| Edges, finish and delivery | Edging or sealing, coating, labels, protective packing, quantities and the destination. | Allow for material added by finishing and agree which operations are completed before shipment. |
Start with the use, sizes, quantities and destination in the Contact enquiry. A brief part description is enough to begin; our team will arrange the drawing details with you when needed.
Identify the important dimensions, measurement references, visible faces, cut-edge condition and hardware fit. Specify the inspection arrangement and any physical assessment of a machined detail before repeat production. Keep those checks with the same material and drawing revision.
Your quotation identifies the supplied panels or parts and the agreed checks. For an assembled or installed item, specify the supports, hardware, assembly and complete-product tests you need, and agree whether those are included. Use Quality & Inspection, Standards & Certifications and Shipment & Receiving Inspection for the order documents and checks.
Labels, matching sets and protective separation help your team receive the correct pieces and prepare them for assembly. State quantities per part, pack grouping, visible-face protection and the destination. Packaging must support the actual geometry, finished weight and edges.
CUZI PLY manufactures in Linyi, China. Give the named port or delivery point and target date so the factory schedule, processing, packing and freight can be planned together. Factory export production is different from local walk-in cutting or same-day collection abroad.
Confirm the delivery term, included freight and destination arrangements in the quotation. Keep any workshop finishing, hardware installation and site work identified separately.
Read Packing & Container Loading and Export Process for package and shipment planning.
Regular factory sheet formats: 1220×2440, 1250×2500, 1525×3050 mm. On-request sheet formats: 1250×3050, 1250×3660, 2100×2800, 1830×3660, 1250×3800 mm. Finished part dimensions, thickness, direction and tolerances belong on the cutting or component drawing.
Your quotation identifies the plywood construction and whether the order contains full sheets, cut blanks or processed parts, with finished dimensions and quantities.
Keep cutting, profiles, holes, edging and coatings with the part list. Identify any operations your workshop completes after delivery.
Where needed, agree drawing preparation, setup, tools or jigs and their cost and timing separately from repeat-part production.
Agree dimensional checks, face and edge appearance, joint or hardware fit and any requested product tests before the production schedule is set.
Specify part labels, handed pieces, matching sets, protective separation and pack quantities so receiving and assembly follow the same list.
Use the named destination and delivery term, with freight and other included charges stated. Keep repeat orders connected to the material, drawing revision and finish.
Compare the same construction, part mix, included operations, finish, checks and packing—not only a sheet or machining price. We confirm quantities, preparation, production timing and commercial terms for your order.
Parts, drawings and factory orders
Start with cut-to-size panels or blanks, CNC profiles and holes, edge banding or sealing, and the finish your parts need. CUZI PLY manufactures the plywood and quotes the supplied panels or components with the operations agreed for your order. Send the material, part sizes, quantities and destination; we help complete the cutting and finishing requirements.
Give a part list and drawing revision, units, finished dimensions, thickness, construction, grain direction, profiles, holes and important tolerances. Add visible faces, edging or coatings, hardware and quantity per part. Identify whether you need blanks, processed components or parts that your workshop will finish or assemble.
Yes. Send the intended use, material or finish, dimensions, quantities and destination in the Contact enquiry. Describe the shape, holes and fit you already know. Our factory team will help identify the remaining specifications and arrange the drawing details needed for a quotation and production.
State the finished part dimensions and identify any blank dimensions separately. Mark the edging material and thickness, the edges covered and the final face finish. Cutting, machining and edging then use the same dimensional basis rather than different assumptions.
No. Finished-part dimensions also depend on the plywood, actual thickness, flatness, work holding, finishing and measurement condition. Put the important tolerances and reference faces on the drawing. The quotation and production requirements identify the checks for your construction and geometry; there is no single tolerance for every plywood part.
Mark the face grain, visible surface, handed pieces and matching sets on the part list. Keep the same information through nesting, machining, labels and packing. Include any veneer, decor or colour matching requirements so the material layout balances appearance and usable yield.
Not necessarily. Choose the edge material, adhesive and treatment for the panel and its use. Newly cut holes, joints and later trimming also need the specified protection. State wetting, cleaning and finish requirements for the complete part rather than ordering only an attractive edge.
We quote the panels or processed parts, dimensions, finish and operations included in your order. For an assembled or installed item, identify the hardware, supports, assembly and complete-product tests you need; the quotation states whether those are included. Describe the finished item and the work you want our factory to provide.
CUZI PLY manufactures in Linyi, China. We quote factory production and delivery to your named destination. Order quantities, processing, protective packing and transport are planned together; this is different from a local retail cutting counter or same-day collection service.
They depend on the panel construction, part mix, processing, finish, quantity and delivery requirements. We confirm the material and supplied parts, included operations, any preparation or tooling, packing and delivery terms in your quotation. Production time and transit time are identified separately.
Yes. Describe the plywood, thickness, finish, edge, joint or machined feature you want to assess, with the destination. We confirm availability, any preparation, sample and courier costs, and dispatch arrangements. Agree any production-part checks or project tests separately.
Send the use, plywood or finish, dimensions, quantities and destination. Describe the cuts, holes, edging and assembly fit you need. Our factory team will help turn those details into a clear panel or processed-part quotation.
For a physical assessment, identify the material, finish, machined feature or fitting detail you need. We confirm availability, preparation, sample and courier costs and dispatch arrangements before proceeding.