Order spruce plywood sheets or cut parts built around your dimensions, surface and assembly. CUZI PLY manufactures in Linyi, Shandong, China, with the spruce face and inner construction specified for your order. Work directly with our factory team on usable sheet formats, finishing, packing and delivery.
Plan the usable face, trimming and grain direction around your cut list. Agree the finished thickness, edge quality and surface preparation for parts that fit your assembly.
Choose the surface for the finished appearance and the inner veneers for the complete part. Spruce plywood panels can use a spruce face, spruce inner veneers or spruce throughout; the layer arrangement, bond and dimensions are specified together.
Choose a spruce surface for the sides that will remain visible. Specify the inner veneers around cut edges, joints, hardware and handling. A covered back can have a different appearance requirement from the front.
For your enquiry: Visible sides, spruce face grade, inner species or mix, permitted repairs and intended finish.
Specify spruce in the outer and inner layers, with the veneer arrangement and finished thickness chosen for your part. Agree face and back grades, core gaps, repairs and bond together rather than comparing only the species name.
For your enquiry: Species in each layer, ply arrangement, face/back grade, finished thickness and service conditions.
Use spruce inner veneers beneath another specified face. Choose the outer veneers and surface preparation for the finished appearance, and name the inner construction separately for machining and assembly.
For your enquiry: Face and back material, spruce inner veneers, balancing, finished thickness and exposed edges.
A painted lining, covered furniture back and working crate need different priorities. Tell us how the component is assembled, handled and used; we help choose the board and processing around the result you need.
Choose the face preparation for what remains visible after coating. Include joints, routed edges, holes and the back where it remains in view, then set the board thickness around the installation and fittings.
For your enquiry: Visible sides, paint or coating, knots and repair allowances, finished edges, support and fixing positions.
Choose panels for interior componentsPut usable sheet area, finished fit and machining ahead of a premium face when the surface will be covered. Specify thickness, flatness, reference edges and hardware so the parts work in your assembly.
For your enquiry: Part layout, dimensions, joints, holes, hardware, tolerances and the surface that will be covered.
Compare furniture component requirementsSelect the construction around the cargo, panel spans, handling and fastening layout. Compare sheet yield and part quantities alongside face allowances, and plan protection for the journey and any intended reuse.
For your enquiry: Cargo and case design, spans, fixings, handling, stacking, exposure, reuse and destination.
Plan panels for your packagingStart with the structural product and properties named for your project. Specify the supports, panel direction and fixings alongside the grade and bond, with the applicable product documents for the complete board.
For your enquiry: Project use, product standard, required properties, support spacing, panel direction, fixings and exposure.
Select the required structural productMake the cut list part of the order. We agree usable dimensions, finished thickness and the requested processing, then pack and identify the sheets or parts for your team.
Choose a format that fits your parts, grain direction and equipment. Include trimming and the usable face area when comparing sheet yield, and specify the dimensions and flatness your team needs for processing.
For your enquiry: Part layout, face-grain direction, trimming allowance, finished thickness and handling size.
Order the required quantities by part rather than only a total sheet count. Agree length, width, reference edges and grain direction, then identify the parts in bundles for assembly and repeat purchasing.
For your enquiry: Part names, dimensions, quantity by part, tolerances, grain direction and bundle labels.
Specify holes, profiles and edge preparation from agreed reference edges. Match the board thickness and finish to joints, hardware and fitting positions, with protection for the surfaces that will remain visible.
For your enquiry: Reference edges, hole centres, profiles, edge quality, joint fit, finish and quantity.
Compare paint, clear coatings or applied facing on the chosen spruce surface, including knots, repairs, hole exits and cut edges. Agree visible-side requirements and back preparation before ordering repeat parts.
Start with the part dimensions, use and surface you know. Our factory team helps complete the veneer selection, board requirements, processing and supply details for your quotation.
| Field | Options and order requirements |
|---|---|
| Spruce in the panel | Name the spruce material and whether it is required in the face, core or throughout. Identify any other outer or inner veneer species in the chosen construction. |
| Face and back grade | State the grading system and visible sides. Agree knots, patches, repairs, open defects, grain and colour around the appearance after painting, coating or assembly. |
| Core construction | Choose spruce throughout, a spruce face over selected inner veneers, or a spruce core beneath another face. Specify core gaps, repairs and exposed cut-edge requirements. |
| Veneer arrangement | Agree ply count and layer arrangement with the finished board. Include grain direction, machining and any project requirements for the complete construction. |
| Finished thickness | Send the required finished thickness and tolerance, including sanding, coating or further facing. We state the thickness basis for the selected panel and processing in the offer. |
| Sheet and part dimensions | Choose from Sheet sizes or send your finished part list. Include length, width, reference edges, quantity by part and dimensional tolerances. |
| Usable area and face grain | Provide the cutting layout, grain direction and trimming allowance. Identify defects or repairs that are not acceptable within visible or machined parts. |
| Surface preparation | Choose the sanding and face allowance for paint, a visible wood finish, applied facing or a covered part. Include the back, knots, repaired areas and edges in the finished appearance. |
| Machining and reference edges | Specify holes, profiles and edge preparation from named reference edges. Agree hole exits, joint fit, hardware positions and identification for component sets. |
| Flatness and squareness | Agree flatness, squareness and measurement conditions around cutting, assembly and installation. Include the support and storage conditions for the sheets or parts. |
| Bond and exposure | Describe indoor service, wetting and drying, or exterior exposure and name the required bond specification. Include coatings, protected cut edges, holes and joints for the finished component. |
| Project properties and documents | For specified structural work, send the product standard, required properties, supports and fixings. We identify the applicable panel construction and product documents with the quotation. |
| Indoor emissions | State the destination, use and required test method or limit. Include any adhesive, coating or facing added to the finished component when setting its requirements. |
| Timber origin and sourcing | Name the timber-origin or sourcing information needed for the veneers. CUZI PLY manufactures in Linyi, China; the timber source and panel manufacturing location are separate details. |
| Moisture and panel mass | Agree moisture and conditioning requirements for processing. Compare panel mass on the same construction, finished thickness, dimensions and moisture condition rather than using the spruce name as a weight specification. |
| Quantity, packing and delivery | State the sheet or part mix, quantities, destination and target date. Agree flat support, face and edge protection, pack identification, unloading and the named delivery term. |
Choose the sheet format around part dimensions, grain direction, trimming and the size your team can handle. Specify the finished thickness and tolerance for fitting and assembly. For imperial orders, agree the actual finished millimetre dimensions.
Length and width can be made to your requirements. Select the construction and applicable product documents for the use, with custom dimensions recorded in your order specification.
Review sheet sizes and thicknessesTell us the destination, application and named requirements. We identify the applicable material information, certificates, declarations and test reports with the offered construction, so you can review the panel for your order and project.
Identify spruce in the outer and inner layers, the grading system and any required timber-origin or sourcing information. The quoted construction states both the visible face and the core.
Include the service conditions, destination and required method or limit. We identify the bond and applicable reports for the offered board, including added surfaces where relevant to the finished component.
Send the named product standard and required properties. We help match the construction and applicable certificates, declarations or reports to the specified use, supports and installation.
Agree dimensions, thickness, appearance, cut edges and part identification before packing. Protect visible surfaces and keep panels supported, with the packing list showing your ordered mix and quantities.
CUZI PLY is your spruce plywood manufacturer and direct supplier. Compare the face and back selection, inner veneers, finished thickness, usable format, bond, machining and quantities on the same basis.
Send your sheet or part mix, use and destination. We confirm the production plan, packing and delivery arrangements with the offer, including sample arrangements where requested.
For a sample, name the face, core, thickness and finish to evaluate. We agree suitable pieces, any sample and courier costs, and dispatch arrangements before sending them.
Your quotation states currency, price unit, quantities, processing, payment, packing, delivery terms and validity. Production time is separate from shipping transit; freight, insurance, duties and taxes are included only when listed.
Spruce panels, parts and orders
It is plywood made with spruce veneers in the face, core or throughout. Specify which layers use spruce, the other veneers if any, face and back grades, layer arrangement, bond and finished dimensions. Our quotation identifies the complete board you will receive, not only its surface material.
Not necessarily. A spruce face can be used over selected inner veneers, and spruce inner veneers can be covered by another decorative face. If you need spruce throughout, state it explicitly. Cut edges, joints, hardware and machining help determine the right inner construction for your component.
They are different softwood material choices. Compare the named species, visible surface, inner veneers, finished dimensions and processing around the same part. Grain, knots, repairs and the appearance after finishing matter for visible work; product properties and applicable documents matter for specified building work. Our Softwood and Pine pages help compare these purchasing requirements.
CUZI PLY manufactures plywood in Linyi, Shandong, China, with 10 production lines across our plywood range. We are your factory and direct supplier for the named face and core construction. Timber origin and any required sourcing information are stated separately from our panel manufacturing location.
Yes. Describe the component, visible sides, finish, support and fittings. Choose face and back grades, core, sanding, edge preparation and finished thickness around your assembly. For paint or clear coatings, compare the finish on knots, repairs and cut edges as well as the main face.
Name the grading system and what each side may show. Agree knots, patches, repairs, open defects, grain and colour with the intended finish. A visible front and a covered back can have different requirements. Keep these appearance requirements with the chosen board for repeat orders.
Yes. For full sheets, send the cutting plan, usable format and face-grain direction. For parts, include dimensions, quantity by part, reference edges, holes, profiles and tolerances. We quote the board and requested processing together, with part identification and protection for packing.
Start with the finished thickness, tolerance and part layout. See Sheet sizes for regular and made-to-order formats, and include trimming, grain direction and handling limits. Length and width can be made to your needs. We agree your dimensions and tolerances with the selected construction and processing.
Compare the finished panel mass rather than relying on the wood name. Inner construction, veneer arrangement, thickness, size and moisture condition all matter. Give us the handling or component-weight requirement and the dimensions so we can define an appropriate board and the mass information for your order.
Use the structural product specified for the project. Send the panel standard, required properties, support spacing, panel direction and fixing requirements so we can identify the applicable construction and documents. A spruce face or all-spruce core alone does not provide structural design values; start with our Structural Plywood range for this use.
Choose the complete board and protection for the service conditions. Agree the bond, wetting and drying, coatings, cut edges, holes and joints. Exterior siding or treated work has additional requirements, so use the relevant product range rather than selecting by spruce appearance alone.
Face and back grades, inner veneers, thickness, bond, dimensions, machining and quantity all contribute to the quotation. Compare the cost of usable parts as well as the price per sheet: trimming, grain direction, permitted defects and cutting layout affect how many finished components you obtain. We state the quoted unit, processing and packing so you can compare equivalent supply.
Yes. Keep the agreed board construction, part list and drawing revision with your reorder. Tell us about changes to the finish, fittings, dimensions or quantity mix so we can confirm the processing and packing. We agree minimum quantities and a production schedule for your mix before order confirmation, with shipping transit stated separately.
Send the use, face/core requirement, size and thickness mix, processing, quantity, destination and target date. Your quote states currency, price unit, packing, payment and delivery terms. For a sample, name what you need to evaluate and the delivery country; we agree suitable pieces, any sample and courier costs, and dispatch arrangements before sending them.
Compare named softwood faces, cores and complete constructions.
Choose pine materials and face preparation for your finished parts.
Select panels for working crates, cargo protection and reusable cases.
Plan surface preparation, machining and fit for furniture components.
Choose pack dimensions, support, protection and unloading arrangements.
Explore the products made and supplied directly by our factory.
Tell us what you make, the surface you need and the quantities. We will help complete the board specification and prepare your factory offer.