Get the face your customers will see and a core selected for the parts you make. CUZI PLY manufactures mixed-veneer plywood in Linyi, Shandong, China, combining named birch, poplar or eucalyptus veneers with your chosen surface. Work directly with our factory on cut edges, machining, finished fit and a quotation for the complete board.
Select the face for your finish and name the inner veneer arrangement for the part you make. Include visible cut edges, routed profiles, hardware positions and finished thickness in the same order.
Choose an inner veneer combination and the arrangement for your finished thickness. Poplar, birch and eucalyptus can be specified in different positions; the outer face, back and bond are separate choices. We put the complete combination into the product you order.
Combine named birch and poplar veneers beneath the face you select. Specify where each material sits in the core, its grain direction and the finished cut edge. A birch outer face can be selected without ordering birch throughout the board.
For your enquiry: Face/back species and grade, birch/poplar layer arrangement, visible edges, routing and hardware positions.
Choose a stated poplar–eucalyptus arrangement for furniture parts, further facing or packaging. Compare the complete board at the same thickness and dimensions for mass, machining, joint fit and cost rather than assuming one property from the material names.
For your enquiry: Poplar/eucalyptus positions and veneer sequence, face preparation, finished thickness, part mass and processing.
Specify a birch–eucalyptus core with the outer veneers and edge appearance your component needs. Include grooves, rebates and fixing locations so the remaining layers and finished dimensions are part of the construction you buy.
For your enquiry: Named birch/eucalyptus arrangement, outer veneers, profiles, remaining material after machining and dimensional tolerances.
Choose birch outer veneers for the appearance you want, then name the mixed inner construction. A birch-faced combi board is not the same specification as birch throughout: compare the visible face, edge layers, machining and part mass before choosing your order.
Agree the face and back grade, veneer cut, patches and matching for the parts that remain visible. Include the thickness after sanding or facing, the edge finish and the layer arrangement around grooves, rebates or hardware.
Furniture, applied surfaces, cases and concrete forms have different priorities. Tell us what stays visible, how the panel is cut and joined, and the service conditions; we help specify the board and requested processing together.
Choose the face your customer sees and the core around grooves, holes and fittings. Agree thickness, reference edges and joint fit for shelves, doors or cabinet parts, with exposed layers finished as part of the design.
For your enquiry: Visible sides, cut parts, profiles, hardware, support, exposed edges and finished-fit tolerances.
Plan your furniture componentsCoordinate the mixed veneer substrate with sanding and the applied surface. Specify the back arrangement, edges and final dimensions after facing, especially where a panel is cut, pressed or machined before assembly.
For your enquiry: Facing material, substrate arrangement, sanding, back balance, flatness, edges and finished thickness.
Choose the complete surface systemCompare board mass, cut-edge quality and the fixing layout for the complete case or component. Include corners, joints, seals and surface protection, with the handling and support of the assembled product defined.
For your enquiry: Panel spans, case design, fittings, joints, profiles, part weight, exposure and handling.
Choose panels for protective casesOrder the complete Film Faced product with the inner arrangement identified. Compare film, bond, core gaps, sealed cuts and support around the concrete finish and handling; the Combi name alone does not specify a formwork board.
For your enquiry: Concrete finish, film, veneer construction, bond, thickness, supports, fixings, edges and reuse conditions.
Specify Film Faced PlywoodChoose a mixed-veneer construction around the finish, machining and budget for your component. Compare it with an all-birch or other named board at the same face grade and finished dimensions, including usable parts, processing and delivery in the cost.
Compare the same face and back species, appearance grade, repairs and finish. A birch-faced combi board and an all-birch board can have different inner veneers even when their visible surfaces look similar.
For your enquiry: Visible sides, face/back grades, veneer cut, matching, repairs, sanding and applied surfaces.
Agree core gaps and joint allowances around the part you will machine. Compare routed profiles, exposed edges, hole exits and the actual hardware or joint—not only the face of an uncut sheet.
For your enquiry: Edge treatment, profiles, hole positions, hardware, finished thickness and assembly fit.
Use the same finished dimensions, moisture condition and construction when comparing board mass. Keep quantities, processing, packing and delivery terms aligned in the quotations; an unspecified mixture is not a like-for-like price.
For your enquiry: Measured panel or part mass, conditioning, order mix, machining, price unit and delivery basis.
Record the face, back, inner materials, layer sequence, grade, thickness and processing together. Keep the drawing version, face-grain direction, matching part labels and any permitted material changes with your purchase reference. These details help us reproduce the construction and component fit you ordered.
Start with the face, use, dimensions and quantity. We help complete the inner construction, processing, product documents and delivery basis for an offer you can compare.
| Field | Options and order requirements |
|---|---|
| Face and back materials | Name the outer veneer species, including birch where selected. Specify the face and back separately from the mixed inner veneers, with the finish and visible sides identified. |
| Inner veneer combination | State the birch, poplar, eucalyptus or other agreed materials in the core. Identify their positions and any allowed substitutions in the order; Combi alone does not define the mixture. |
| Layer sequence and grain direction | Agree the veneer arrangement, ply count and orientation for the selected finished thickness. Include the face-grain direction and the layers remaining after grooves or rebates are machined. |
| Face grade and appearance | Choose a named grading system and agree knots, patches, repairs, colour, veneer cut and matching around the parts that remain visible. Keep the back requirements in the specification. |
| Core gaps, joints and cut edges | Agree core gap, overlap, joint and repair allowances for the cut or routed part. State whether edges are exposed, banded or concealed, with the final edge appearance required. |
| Finished thickness and tolerance | Send the finished thickness and tolerance, including sanding or an added facing. The offer identifies the supplied board and the thickness basis after requested processing. |
| Sheet and part dimensions | Choose from Sheet sizes or send the part list. Include length, width, quantity, face-grain direction, trim allowances and dimensional tolerances for sheets or cut components. |
| Sanding, coating and applied facing | Specify face preparation for clear finishes, paint, melamine, HPL or another applied surface. Agree the reverse arrangement, edge treatment and dimensions of the finished panel. |
| Profiles, holes and hardware | Provide the drawing version, reference edges, profiles, hole centres, joints and hardware positions. Agree hole exits, remaining material, fit and cut-edge quality on the selected veneer construction, with part labels and grain direction for matching components. |
| Flatness and squareness | Agree measurement conditions and tolerances around facing, cutting and assembly. Include the storage and support requirements for the panels or parts you will process. |
| Moisture and finished panel mass | State conditioning and moisture requirements for processing and any component-weight limit. Compare measured mass or density at the same dimensions, thickness, veneer arrangement and moisture condition. |
| Bond and service conditions | Describe indoor use, wetting and drying or other exposure, with the required bond specification. Include coatings, cut edges, holes and joints for the finished component. |
| Indoor emissions | State the destination, application and required method or limit. Define requirements for the complete panel, including any additional coating, adhesive or facing used in your finished part. |
| Project standards and product documents | Send any named structural, marine, formwork or other product requirement. We identify the applicable complete construction and documents with the offer rather than treating the core name as a grade. |
| Veneer origin and repeat orders | Include any required timber-origin or sourcing information. Keep the agreed species, layer arrangement, grades and processing identified for repeat orders; our manufacturing location is Linyi, China. |
| Quantity, packing and delivery | State the sheet or part mix, machining quantities, destination and target date. Agree identification, surface and edge protection, flat support, unloading and the named delivery term. |
Compare regular and made-to-order formats against face-grain direction, trimming and the quantities in your cutting layout. Include the finished thickness, tolerance and any surface added before assembly.
Custom length and width are recorded with the selected veneer construction and use. For imperial specifications, agree the actual finished millimetre dimensions and tolerances rather than only a nominal sheet label.
Review sheet sizes and thicknessesTell us the destination, use and named requirements. We identify the applicable materials, certificates, declarations and reports with the offered panel. The documents and manufacturing specification describe the complete product, not an unspecified mixture.
Identify the outer veneers, inner species and layer sequence for the offered thickness. Include sourcing information needed for your order and keep the construction identified for repeat purchasing.
Describe the exposure, destination and required method or limit. We identify applicable product reports with the selected construction, including additional coatings or facings in the finished panel requirements.
Send any named product standard and properties your project needs. Review the documents for the offered construction and use rather than assuming a Combi label establishes a structural or other specified grade.
Agree face grade, thickness, flatness, dimensions, core and cut-edge checks for the part you make. Keep machined pieces identified and supported, with surfaces and edges protected in their packs.
CUZI PLY is your combi core plywood manufacturer and direct supplier. Compare the same face grade, named inner arrangement, finished dimensions, processing, quantities and delivery terms in each offer.
Send the part you make, size and thickness mix, finish and destination. We confirm the offered construction, order mix, production plan and export packing, with requested machining and product documents stated together.
For a sample, identify the face, core and finished thickness, with the cut edge or processed part you need to evaluate. We agree suitable pieces, any sample and courier costs and dispatch arrangements before sending them.
Your quotation states currency, price unit, quantities, processing, payment, packing, delivery terms and validity. Production time is separate from shipping transit; freight, insurance, duties and taxes are included only when listed.
Mixed veneers, birch faces and finished components
Combi core plywood combines specified veneer materials in a plywood construction rather than using one timber throughout. The term is also used for different face-and-core arrangements, so name the face, back, inner materials and layer sequence in your order. CUZI PLY manufactures the selected construction for your finished part and use.
Birch combi plywood can have birch outer veneers over a stated mixed inner construction. All-birch plywood specifies birch throughout the veneer layers. Compare the same face grade, finish, thickness and dimensions, then identify the core, cut-edge requirements, mass and applicable product documents separately.
Start with your face, part weight, cut edges and assembly. Agree which veneers are used in each position and their orientation for the finished thickness. Compare mass, machining and the assembled component for that construction rather than assuming every poplar–eucalyptus mixture has the same performance or price.
This page covers mixed wood-veneer constructions. In some markets, combination-core terminology can also refer to boards with MDF or other non-veneer layers. If your specification uses that meaning, name every material and its position when you contact us, so the quotation describes the construction you actually need.
The quotation depends on the face, veneer arrangement, grade, finished dimensions, processing, quantity and delivery basis. Compare the same specification and price unit. A mixed construction is not automatically the lowest-cost option once machining, finish, usable parts and delivery are included.
Yes. Send the profiles, hole positions, reference edges, hardware and finished-fit tolerances. Agree core gaps, joints, edge appearance and the material remaining after routing. Evaluate a cut and assembled part with the selected construction, particularly where the layer pattern or fixing position will remain visible.
Yes. Select surface preparation and the veneer construction with the complete finish in mind. Include the back arrangement, flatness, edges and final thickness after finishing. For ready-faced supply, use our Melamine or HPL product range to specify the surface and substrate together.
See Sheet sizes for regular and made-to-order formats. Send the required finished thickness, tolerance, quantity and cutting layout, including face-grain direction and trimming. Custom length and width are recorded with the selected construction and use; the quotation states the dimensions and processing supplied.
It depends on the actual inner materials, layer arrangement, outer veneers, finished thickness, dimensions and moisture condition. State any component-weight or handling requirement. We use the offered board’s measured or agreed mass information instead of applying one density to every mixed core.
Select the complete product for the service conditions and any named standard. Core materials alone do not establish a structural, marine or waterproof grade. For concrete forms, choose the Film Faced product with its surface, bond, edges and support requirements; for wet-service parts include coatings, cuts, joints and wetting and drying.
Yes. Send the current drawing version, part list and quantities, including face-grain direction, matching parts, exposed edges and hole positions. We agree the veneer arrangement, finished dimensions, machining and part labels for your order. Keep these details with your purchase reference so later orders use the same construction and component requirements.
CUZI PLY is the manufacturer and direct supplier in Linyi, Shandong, China. Our factory operates 10 production lines across our plywood range. We identify the offered materials, construction, processing and delivery arrangements in the quotation. Timber sourcing and panel manufacturing location are separate details.
Send your face choice, required inner combination, finished dimensions and thickness, grade, quantity, machining, finish, destination and target date. Include any project documents needed. For a sample, identify the construction and the cut edge or finished part to evaluate; any sample and courier costs and dispatch arrangements are agreed before sending it.
Compare birch faces and complete birch constructions.
Compare a named alternative core on the same finished specification.
Choose eucalyptus throughout, in the core or in the face.
Select another named decorative face with the inner board specified.
Protect surfaces and cut parts with support and labels for delivery.
Explore boards manufactured and supplied directly by our factory.
Tell us the part you make, the surface you want and your quantities. We will help complete the mixed-veneer construction and processing specification for your quotation.